Clean and dry glass before starting. Also make sure to shake ceramic coating bottle before opening, and that the microfiber block is clean.

Apply a straight line of ceramic coating on your block. Cover the block from top to bottom, but just a thin line, not the entire block.

Apply the ceramic coating in a 2ft. x 2ft. section on the glass. Apply in a straight line from left to right and from top to bottom.

Let the Coating cure. In normal situations, it takes about 2-3 minutes to cure.

Once the coating has cured, buff the residual from the glass using a clean microfiber towel. Use a light to ensure all excess is removed. Leaving excess ceramic will leave streaks.

Repeat these steps until entire panel is finished. Always remember to replace microfiber suedes anytime it hardens.